POWR
2. Remove the nut on the flywheel magnet.
cC
Apply force in the direction of the arrows
shown. While working, do not allow the
flywheel holder to slip off the flywheel.
Flywheel holder: 90890-06522
3. Remove the flywheel magnet.
cC
9 Screw in the flywheel puller set bolts
evenly to the full extent.
9 Make sure the puller plate is set parallel
with the flywheel magnet.
NOTE:
Screw in the flywheel puller set bolt until the
flywheel magnet comes off completely.
5-15
Power unit
6D450220
6B450090
Flywheel puller: 90890-06521
4. Remove the Woodruff key.
5. Disconnect the engine stop lanyard
switch leads and ground lead.
6. Remove the choke rod 3.
3
7. Remove the throttle cables (for tiller con-
trol model) or cable joints (for remote
control model).
6D450230
6D450240
6D450250
6D450260
6D45F11