Unitek Miyachi IP-215A User Manual page 56

APPENDIX A: TECHNICAL SPECIFICATIONS
Input Power Line Voltage Range . . . . . . . . . . . . . . . . . . . 220 VAC, ±10%, 3 Phase, 50/60 Hz
Input Power Line Current (peak maximum) . . . . . . . . . . . . . . . . . . . . . . . . . IP-215A: 50A
Control Frequency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 KHz
IP-215A Heat 1 and Heat 2 Setting Ranges:
Heat 1 (Constant Current Control) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.20 - 2.00 KA
Heat 1 (Constant Voltage Control) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.20 - 2.00 V
Heat 2 (Constant Power Control) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.04 - 4.00 KW
IP-217A Heat 1 and Heat 2 Setting Ranges:
Heat 1 (Constant Current Control) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.40 - 4.00 KA
NOTE: If a Model IT-500A Welding Transformer is selected and the current setting is
more than 2.01 KA, a current setting error will occur.
Heat 1 (Constant Voltage Control) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.40 - 4.00 V
Heat 2 (Constant Power Control) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.16 - 9.99 KW
Monitor Setting Ranges:
Constant Current Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±0.00 - 9.99 KA
Constant Voltage Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±0.00 - 9.99 V
Constant Power Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±0.00 - 9.99 KW
NOTE: A 0.00 setting turns off monitoring.
Power Supply Memory Back-Up:
Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Lithium battery, Fuji CR2/3 8.L or equivalent
Service Life (minimum): . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 years
Ambient Operating Temperature . . . . . . . . . . . . . . . . . . . . . . . . . 0° to +45° C (32° to 113° F)
IP-215A/217A FINE SPOT WELDING POWER SUPPLIES
A-2
POWER
ENVIRONMENT
IP-217A: 200A
993-603 REV A: October, 1996