Table of Contents
Advertisement
ABOUT YOUR EQUIPMENT
Overview
The IP-215A/IP-217A is a high frequency inverter resis-
tance welding power supply designed for fine spot
welding of precision parts. Figure 2-1 shows the physi-
cal characteristics of the 215 Power Supply. The 217
Power Supply is identical except for minor differences
in the front panel key locations.
Simple programming through the front panel controls
and display provides you with a choice of up to three
welding control modes and a variety of welding parame-
ter settings. This versatility brings to your welding
applications reliable and consistent nugget formation,
improved weld quality, and the welding speed required
to work with semi-automated or fully automated equip-
ment.
Performance Features
For a complete listing of the Power Supply's technical
specifications, please refer to Appendix A. The follow-
ing is a summary of the Power Supply's performance capabilities.
Feedback Control Modes
Constant Current:
IP-215A/IP-217A FINE SPOT WELDING POWER SUPPLIES
993-603 REV A: October, 1996
CHAPTER 2
Use where welding load resis-
tance is subject to variation, such
as in varying weld forces, weld
piece plating inconsistencies, and
uneven work surfaces. Since this
mode is suitable for all types of
work pieces, always use it when
starting an application.
Figure 2-1. IP-215A Fine-Spot
Welding Power Supply
IP2PFRON.WPG
2-1
Advertisement
Table of Contents
