Table of Contents
Advertisement
OPERATING YOUR POWER SUPPLY
This chapter gives you instructions about entering data to (editing) the display screens, setting
weld schedules, selecting welding transformers, setting control modes, and monitoring Power
Supply performance with the display screens. Refer to Chapter 4 for functional descriptions for
the controls and the display.
Display Screen Data Editing
To enter or change data on the display screen:
1.
Press the desired display entry key to activate the associated display function. For ex-
ample, if you wish to activate the Weld Schedule display screen, press the WELD
SCHED. key.
2.
With the CURSOR keys, move the cursor to the position of the character that you wish to
enter or change.
3.
Press the -DOWN DATA key to lower the value or selection at the highlighted character
position(s). Press the UP+ DATA key to raise the value or selection at the highlighted
character position(s). For a list of numerical ranges for the data fields, refer to Table 5-1.
As an example exercise of display screen editing:
a. Press the WELD SCHED. key to
access the Weld Schedule display
screen.
b. With the CURSOR keys, move the
cursor to the mode selection
character position (I.V.W).
c. With the -DOWN DATA and UP+
DATA keys, scroll through the
three selections of I, V, and W. The
character that you leave selected will be your choice of control modes.
IP-215A/IP-217A FINE SPOT WELDING POWER SUPPLIES
993-603 REV A: October, 1996
CHAPTER 5
5-1
Advertisement
Table of Contents
