Welcard System Error Messages; Welcard Error Messages - Unitek Miyachi IP-215A User Manual

CHAPTER 6: USING THE WELCARD
5. Press the ENTRY key to enter the file number and access the File Name Entry
display screen. With the CURSOR and DATA keys, key in a source file name up to
eight characters long.
6. Press the ENTRY key to access the
File Confirmation display screen. If
the file number and name are as you
specified, select YES with the
CURSOR keys and press the ENTRY
key to execute the data copy from the
Welcard to the Power Supply. If you
select NO, the procedure will return to Step 1.

Welcard System Error Messages

Refer to Table 6-1 for a list of error messages that are displayed when a system or operating
error occurs.
Table 6-1. Welcard Error Messages
Display Message
? UNFORMATTED CARD
COPY FROM
UNFORMATTED CARD
IMPOSSIBLE !!
IP-215A/IP-217A FINE SPOT WELDING POWER SUPPLY
6-6
Probable Cause
1. Unformatted card is
installed.
2. Damaged card is installed.
3. Card battery is dead.
1. Unformatted card is
installed.
2. Card battery is dead.
Remedy
Format the card.
Install undamaged card and
format the card.
Replace the battery and
format the card.
Format the card.
Replace the battery and
format the card.