Table of Contents
Advertisement
Figure 6-1. The Welcard Data Storage
System
2. When you wish to replace the battery, insert the Welcard into the Welcard drive and be
sure that the Welcard status indicator turns ON. You may now replace the battery without
losing the data that was on the Welcard.
3. The battery is a Panasonic 3V BR2016, or equivalent. Its life is five years. We
recommend that you replace the battery more frequently.
4. When you replace the battery, observe the correct polarity.
IP-215A/IP-217A FINE SPOT WELDING POWER SUPPLIES
993-603 REV A: October, 1996
CHAPTER 6
USING THE WELCARD
ME35.WPG
The Welcard (Figure 6-1) allows you to
record, store and re-use welding schedules
and monitored weld data. It's as easy to use as
a PC diskette drive, which it resembles.
Care and Treatment of the
Welcard
Do not insert anything other than the
Welcard in the slot of the Welcard
drive.
Keep the Welcard edge connectors
free of dirt, oil and moisture.
When you are not using the Welcard,
place it in its antistatic vinyl case and
store it in a safe place.
Battery:
1.
If you remove the battery from
the Welcard, stored data will
be lost.
6-1
Advertisement
Table of Contents
