Table of Contents
Advertisement
3.
Select YES with the CURSOR keys
and press the ENTRY key to confirm
the copy direction and access the File
Number Selection display screen. If
you select NO, the procedure will
return to Step 1.
4.
With the CURSOR keys, move the
cursor to the file number (F) field and key in a destination file number from 01 to 13
with the DATA keys.
5.
Press the ENTRY key to enter the file number and access the file name entry display
screen. With the CURSOR and DATA keys, key in a destination file name up to
eight characters long.
6.
Press the ENTER key to store the file name and access the file name confirmation
display screen. With the CURSOR keys, move the cursor to YES and press the
ENTER key to confirm the file name that you stored. If you select NO, the procedure
will return to Step 1.
Copying a Schedule to the Power Supply. To copy a welding schedule from the
Schedule Welcard to the Power Supply:
1.
Press the COPY key to access the
Copy Direction dialog screen. It is
showing the default direction of the
Welcard (CARD) to the Power
Supply (IP-215A).
2.
With the cursor on the top display
screen line, press the ENTRY key
to accept the copy direction. This action will access the Copy Direction
Confirmation display screen.
3.
Select YES with the CURSOR keys
and press the ENTRY key to confirm
the copy direction and access the
File Number Selection display
screen. If you select NO, the
procedure will return to Step 1.
4.
With the CURSOR keys, move the cursor to the file number (F) field and key in a
source file number from 1 to 13.
IP-215A/IP-217A FINE SPOT WELDING POWER SUPPLIES
993-603 REV A: October, 1996
CHAPTER 6: USING THE WELCARD
6-5
Advertisement
Table of Contents
