Use only unwoven fiber-less wipes.
Reconnect the DG to the Handpiece.
Cleaning the Novoxel
Storage and Packaging
Device Storage
The device may remain plugged in to an in-wall power source while not in use. Prior to routine
storage, make sure the Tixel2 device is turned off. The Tixel2 device should be placed on a stable, dry
and clean surface. The Tixel2 Handpiece may remain plugged in as well.
For long-term storage or for shipment purposes, follow the next step prior to returning the Tixel2
device to its original packaging:
Disconnect the power cable.
Clean the device Console and components as previously instructed.
Disconnect the Handpieces and place them in their designated boxes.
Place the Console and all components in the Tixel2 device's designated box / bag.
Close the box.
For more information regarding boxing and shipment, contact your vendor.
Disposal
The disposal of the Tixel2 device and its accessories should be performed cord to WEEE directive 2012/
19/EU. In case you wish to dispose of the Handpiece and/or the Console, ship them back to Novoxel/ your
vendor.
Periodic Inspection & Service Instructions
The following instructions should be carried out by a trained operator of the device.
In general, the system does not require any special service other than cleaning and visual inspection.
However, certain inspections should be performed periodically as described herein.
Page | 60
®
Tip - see
Chapter 6: Caring For the
Novoxel.com
User Manual TXLD0012
Tips.
P/N T2-UM-E-ENG Rev 10