Novoxel Tixel2 User Manual page 18




Following high temperature heating, a thin oxidation layer is formed on the Titanium.
The layer acquires some mild colors such as blue, dark purple, and brown. This is a
normal phenomenon in heat-treated titanium. The tip is pre-conditioned by heat during
manufacturing, as it is important to create the oxidation layer for prevention of tissue
adhesion. It is biocompatible.
P/N T2-UM-E-ENG Rev 10
A New Tip is pre-mounted on the Handpiece. It is clean and requires only minor
processing. For instructions, refer to the Tip cleaning instructions in Chapter 7 of
this document.
All information provided regarding the Tip is relevant for both Tip configurations.
Oxidation layer on Tip surface:
Novoxel.com
User Manual TXLD0012
Page | 17