Environmental Protection - Novoxel Tixel2 User Manual

Never use the product under conditions in which condensation has formed or can form in or on the

product, e.g. if the product has been moved from a cold to a warm environment. Penetration by water
or other types of liquids increases the risk of electric shock.
Prior to cleaning the product, disconnect it completely from the power supply. Use a soft, non-lint

cloth to clean the product, as instructed.
Prior to service procedures or replacement of any parts of the device, disconnect it completely from

the power supply.
Service procedures or replacement of any parts of the device should be performed only by qualified

service personnel.
Do not push any objects or fingers into the openings designated for Tip replacement or air ventilation.

Never leave the system unattended in "Operate" mode.


Environmental Protection

Waste electrical products should not be disposed of with household waste. Please recycle
where facilities exist. Check with your local authority for recycling advice or contact your
Novoxel product retailer for more information. The disposal of the Tixel system and/or
components should be performed according to the WEEE directive 2012/19/EU.
1. WEEE = Waste Electrical and Electronic Equipment
P/N T2-UM-E-ENG Rev 10
1
Novoxel.com
User Manual TXLD0012
Page | 11