Table of Contents
Advertisement
User Manual TXLD0012
This step should be performed as follows:
After removal of the Distance Gauge, the exposed Tip may be hot. The operator and/
or any other person/s standing nearby may be injured if contact with the distal end of
the Handpiece occurs. Always perform Distance Gauge removal with both hands
holding the Handpiece and facing the Tixel2 Console.
Place the DG on a clean and dry surface.
Removal of the Handpiece's Distance Gauge
P/N T2-UM-E-ENG Rev 10
Novoxel.com
Page | 39
Advertisement
Table of Contents
