Novoxel Tixel2 User Manual page 11

The following information on electrical safety must be observed, as failing to follow these instructions
may result in electric shock, fire and/or in serious personal injury or death.
Prior to switching the product on, always ensure that the nominal voltage settings of the product match

the nominal voltage of the AC supply network.
This product should be connected to the power mains using a 3-wire (two conductors and ground)

power cable and plug, complying with local regulations. Use this power cable with a properly
grounded electrical outlet to avoid electrical shock.
If extension cords or connector strips are implemented, they must be checked on a regular basis to

ensure that they are intact, positioned safely and safe to use.
The plug of the connecting cable is regarded as the disconnecting device. In such cases, always ensure

that the power plug is easily reachable and accessible at all times (corresponding to the length of
connecting cable, approx. 2 m).
Never use the product if the power cable is damaged. Check the power cable on a regular basis to

ensure that it is in proper operating condition. By taking appropriate safety measures and carefully
laying the power cable, you can ensure that the cable will not be damaged and that no one can be hurt
by, for example, tripping over the cable or suffering an electric shock.
Do not insert the plug into sockets that are dusty or dirty. Insert the plug firmly and all the way into

the socket. Otherwise, sparks that result in fire and/or injuries may occur.
Do not overload any sockets, extension cords or connector strips; doing so can cause fire or electric

shocks.
Never remove the cover or any part of the housing. Doing so will expose circuits and components and

can lead to injuries, fire or damage to the product.
Use suitable over-voltage protection to ensure that no over-voltage (such as that caused by a bolt of

lightning) can reach the product. Otherwise, the person operating the product will be exposed to the
danger of electric shock.
The product is not liquid-proof; therefore, the equipment must be protected against penetration of

liquids. If the necessary precautions are not taken, the user may suffer electric shock or the product
itself may be damaged, which can also lead to personal injury.
Page | 10 Novoxel.com
User Manual TXLD0012
P/N T2-UM-E-ENG Rev 10