Pulse Credit & The Pulse Credit Screen; Purchasing Of Pulse Credit - Novoxel Tixel2 User Manual

Pulse Credit counter. The counter is device specific and does not take into account
which Handpiece is used. The remaining credit is also indicated by color: Green for
up to remaining 2,500 pulses; Yellow for remaining 1,000-2,499 pulses, Blinking
Red for less than 1,000 remaining pulses.
8
For further details on pulse credit, go to the section named Pulse Credit (below) and
the Pulse Credit screen.
9 Current session pulse counter.
Pulse Credit & the Pulse Credit Screen
The Tixel2 is provided with an initial pulse credit of 25,000 pulses. The credit is counted per device. This
means that any compatible Handpiece may be connected to the Console, allowing consumption of the
pulse credit. It is possible to renew your pulse credit at any given time, regardless if it has been exhausted
or not. Updating of the credit is performed by entry of purchased credit codes, to the dedicated code entry
screen on the device or by using a dedicated application, as follows:

Purchasing of Pulse Credit

In order to purchase a new code, contact your local distributor. Please make sure you have your user name
(or request this information from your vendor), together with the serial number of the device for which you
would like to purchase the credit (stated on the label of the device). Once the purchase has been complete,
you will receive a message with the designated code.
P/N T2-UM-E-ENG Rev 10 Novoxel.com
User Manual TXLD0012
Page | 31