Novoxel Tixel2 User Manual page 42

After tip cleaning, clean the toothbrush using the medical grade Alcohol.

After cleaning the Tip, place the Handpiece in its cradle, without the DG. Soak a fiber-less wipe or

gauze in the medical grade Alcohol (70%) in order to clean the Distance Gauge thoroughly. Cleaning
should be performed using disposable gloves.
Return the DG to the Handpiece.

Heat cleaning of the selected Handpiece will now automatically commence. The process is 6:00

minutes long.
You may now select to perform cleaning of the second Handpiece as well. A countdown of 30 seconds

will be displayed, in which you may add the second Handpiece to the cleaning process by pressing on
its icon. If selected, you will then be requested to repeat the cleaning steps. The system will complete
the cleaning procedure by heating the Tip/s for the selected Handpiece/s.
If the second Handpiece was not selected, the heat cleaning process will continue to complete the

process.
Returning to the Home screen will stop the cleaning process.
The following screen will be displayed:
After 6:00 minutes, the cleaning process has been concluded, the Operate screen will be displayed.
P/N T2-UM-E-ENG Rev 10
Tip Heat Cleaning is Performed; A 6:00 Minute Countdown is Displayed
Novoxel.com
User Manual TXLD0012
Page | 41