Push Video Stream To Pc Via Adb Tool; Push Video Stream To Pc Via Network - Thundercomm TurboX C610 Open Kit User Manual

Hide thumbs Also See for TurboX C610 Open Kit:

Table of Contents

Thundercomm TurboX C610 Open Kit

3.10.2 Push video stream to PC via adb tool.

1.Start gst-launch-1.0 on device end

$ adb remount

$ adb shell mount -o remount,rw /

$ adb forward tcp:8900 tcp:8900

$ adb shell

# gst-launch-1.0 -e qtiqmmfsrc name=qmmf ! video/x-

h264,format=NV12,width=3840,height=2160,framerate=30/1 ! h264parse config-

interval=1 ! mpegtsmux name=muxer ! queue ! tcpserversink port=8900

host=127.0.0.1

NOTE: After a few seconds the following log appears indicating that the

camera is up and running

Setting pipeline to PAUSED ...

Pipeline is live and does not need PREROLL ...

Setting pipeline to PLAYING ...

New clock:GstSystemClock

2.Start VLC-Media-Player on PC(Windows/Ubuntu)

Windows:

Open VLC media play and please turn off the Windows Firewall!

Go to "Media" → "Open Network Stream"

Enter "tcp://127.0.0.1:8900" for network URL

Ubuntu:

NOTE:Make sure the device(board) and host(PC) are in the same network

segment!

Please refer to WIFI or Ethernet chapter for how to connect to the network via

Ethernet or WIFI ,after run the following commonds:

Rev. 1.0

MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION

# vlc -vvv tcp://127.0.0.1:8900

Table of Contents

Do you have a question about the TurboX C610 Open Kit and is the answer not in the manual?