Download Print this page

Button Events - Thundercomm TurboX C610 Open Kit User Manual

Hide thumbs Also See for TurboX C610 Open Kit:

Table of Contents

Thundercomm TurboX C610 Open Kit

# echo 255 > /sys/class/leds/green/brightness //Turn on

# echo 0 > /sys/class/leds/green/brightness //Turn off

# echo 255 > /sys/class/leds/blue/brightness //Turn on

# echo 0 > /sys/class/leds/blue/brightness //Turn off

3.7 Button events

The following figure shows the button positions.

Force USB BOOT is forced download mode (emergency download)

NOTE:

Key

VOL UP

VOL DOWN

POWER ON

USBBOOT

1. Get interrupt event:

$ adb shell

# cat dev/input/event0 | hd

# cat dev/input/event1 | hd

Rev. 1.0

MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION

Device node

/dev/input/event1

/dev/input/event0

Table of Contents

Do you have a question about the TurboX C610 Open Kit and is the answer not in the manual?