Pair Outgoing Ssp; Check The Bonded List - Thundercomm TurboX C610 Open Kit User Manual

Thundercomm TurboX C610 Open Kit
inquiry_list
**************************** Inquiry List*******************************
LE-Bose SoundSport
360FLY4K_00C8
LE-reserved_N
**************************** End of List *******************************

3.8.7 Pair outgoing SSP

Use the following command to pair outgoing SSP:

pair<bd_address>
To accept or reject the outgoing pairing for the following example (pair

e4:ba:d9:10:00:c9), type Yes or No and press Enter.
pair e4:ba:d9:10:00:c9
*************************************************
BT pairing request::Device iPhone::Pairing Code:: 281155
*************************************************
** Please enter yes / no **
yes
*************************************************
Pairing state for 360FLY4K_00C8 is BONDED
*************************************************

3.8.8 Check the bonded list

1. After running btapp, type bonded_list and press Enter to check the bonded
list:
bonded_list
************************** Bonded Device List *************************
360FLY4K_00C8
**************************** End of List ******************************
2. Disconnect bonded, type disable and press Enter disable:
disable
killall: qcbtdaemon: no process killed
BtHfpAgMsgHandler event = 1029
killall: wcnssfilter: no process killed
Rev. 1.0 MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION
28:11:a5:01:00:a2
e4:ba:d9:10:00:c9
28:11:a5:24:01:05
a4:f1:e8:c6:2f:b4
28