Vega VEGABAR 87 Operating Instructions Manual page 33

Main menu
Measurement loop name
Application
VEGABAR 87 • 4 ... 20 mA/HART
The main menu is divided into five sections with the following func-
tions:
Setup: Settings e. g. for measurement loop name, application, units,
position correction, adjustment, signal output, disable/enable opera-
tion
Display: Settings, e.g., for language, measured value display, lighting
Diagnosis: Information, for example, of device status, peak value,
simulation
Additional adjustments: date/time, reset, copy function
Info: Instrument name, hardware and software version, calibration
date, sensor features
Note:
For optimum setting of the measuring point, the individual submenu
items in the main menu item " Setup" should be selected one after
the other and provided with the correct parameters. If possible, go
through the items in the given sequence.
The submenu points are described below.
6.5.1 Setup
In the menu item " Sensor TAG" you edit a twelve-digit measurement
loop designation.
You can enter an unambiguous designation for the sensor, e.g. the
measurement loop name or the tank or product designation. In digital
systems and in the documentation of larger plants, a singular desig-
nation must be entered for exact identification of individual measuring
points.
The available digits include:
•
Letters from A ... Z
•
Numbers from 0 ... 9
•
Special characters +, -, /, -
In this menu item you activate/deactivate the Secondary Device for
electronic differential pressure and select the application.
VEGABAR 87 can be used for process pressure and level measure-
ment. The setting in the delivery status is process pressure measure-
ment. The mode can be changed in this adjustment menu.
If you have connected no Secondary Device, you confirm this with "
Deactivate".
6 Set up with the display and adjustment module
33