Table of Contents
Advertisement
PROBLEM
The door is
not closed
The drying rack
is not in place
The laundry
environment is
too cold for the
dryer to function
Maximum cycle
has been reached
Once you have addressed the issue the user prompt was alerting you to, try using your
dryer as per usual. If the issue persists, call your Fisher & Paykel trained and supported
service technician.
26
BEFORE YOU CALL FOR SERVICE
WARNING
WHAT TO DO
Close the door fully and touch
Try opening and closing the door again.
Reposition the load, making sure the load is
correctly in the drum and that protruding items
are not preventing the door from closing.
Replace items on rack or fit rack for 'Wool' and
'Rack Dry' cycles.
The room temperature is too low for the heat
pump system to work effectively. Ensure that
the room temperature is above 5°C to avoid loss
of efficiency.
There are a number of reasons the maximum
cycle has been reached, refer to 'Troubleshooting',
'Dryer is taking too long' for possible causes
and solutions.
.
Advertisement
Table of Contents
