Table of Contents
Advertisement
Lint
Accumulated lint in the dryer can become a fire hazard; it also reduces the efficiency
z
of the dryer by causing longer drying times and increased power consumption.
Clean the lint filter before every load.
z
Ensure the area around the dryer is clear of lint.
z
At regular intervals have the interior of the dryer cleaned of any accumulated lint.
z
This must be done by a Fisher & Paykel trained and supported service technician.
This must be done when the dryer installation is changed from free standing.
The dryer exhaust ducting should be inspected and cleaned periodically to remove
z
accumulated lint.
If the lint filter becomes damaged, contact your Fisher & Paykel trained and supported
z
service technician to arrange getting a new filter. Do not operate your dryer with a
damaged lint filter or without the filter in place, as this will cause damage to your dryer.
Installation
The dryer must be installed in a well-ventilated, dust-free environment.
z
The dryer must not be installed on any textured floor coverings (eg carpet, rugs) to
z
ensure that openings at the base of the machine are not obstructed.
Do not install the dryer behind a lockable door, sliding door, or behind a door where
z
the hinge is on the opposite side to that of the dryer in such a way that the full
opening of the door is inhibited. Ensure the dryer door can always be opened fully.
Please refer to INSTALLATION INSTRUCTION section of this document for detailed
z
installation steps.
6
SAFETY AND WARNINGS
Advertisement
Table of Contents
