Fisher & Paykel DH9060C1 Manual

Fisher & Paykel DH9060C1 Manual

Customising drying cycle

Advertisement

Customising Drying Cycle

Delay Start

The 'Delay Start' option enables you to delay the start of the drying cycle from between
15 minutes and 12 hours. Delayed start options are 15 minutes, 30 minutes, 1 hour, then
hourly up to 12 hours. This can be useful to time your drying to finish when you arrive
home from work, or to start when power rates are lower.
To 'Delay Start' your cycle:
1. Select the cycle using the control dial.
2. Use the < > buttons to increase and decrease the 'Delay Start' time.
3. Touch the
button to confirm.
4. Touch the
to start the cycle.
5. The display will indicate the time until the cycle will start
We suggest that you avoid using 'Delay Start' for damp, non-colourfast items as this may cause dye
run to occur.
https://producthelp.fisherpaykel.com/nz/Dry/Dryers/Heat_Pump/DH9060C1/User_Guide_DH9060C1/08_Customising_Drying...
Updated: Mon, 10 Apr 2023 01:24:34 GMT
Powered by
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DH9060C1 and is the answer not in the manual?

Questions and answers

Summary of Contents for Fisher & Paykel DH9060C1

  • Page 1 5. The display will indicate the time until the cycle will start We suggest that you avoid using ‘Delay Start’ for damp, non-colourfast items as this may cause dye run to occur. https://producthelp.fisherpaykel.com/nz/Dry/Dryers/Heat_Pump/DH9060C1/User_Guide_DH9060C1/08_Customising_Drying… Updated: Mon, 10 Apr 2023 01:24:34 GMT Powered by...
  • Page 2 Favourites can only be removed by using ‘reset defaults’ in the settings menu. When ‘reset defaults’ is selected all favourites saved for all cycles will be removed. https://producthelp.fisherpaykel.com/nz/Dry/Dryers/Heat_Pump/DH9060C1/User_Guide_DH9060C1/08_Customising_Drying… Updated: Mon, 10 Apr 2023 01:24:34 GMT Powered by...
  • Page 3 Some options may not be available for selection under certain conditions and after particular stages of the drying cycle have passed. https://producthelp.fisherpaykel.com/nz/Dry/Dryers/Heat_Pump/DH9060C1/User_Guide_DH9060C1/08_Customising_Drying… Updated: Mon, 10 Apr 2023 01:24:34 GMT Powered by...
  • Page 4 Note: If ‘Beeps’ have been set to OFF in the ‘Settings’ menu — this option will not be available. https://producthelp.fisherpaykel.com/nz/Dry/Dryers/Heat_Pump/DH9060C1/User_Guide_DH9060C1/08_Customising_Drying… Updated: Mon, 10 Apr 2023 01:24:34 GMT Powered by...

Table of Contents