Anti-tip bracket
assembly kit
Anti-tip bracket (1)
Masonry plug (4)
#10x40
cross-head screw (4)
Tools
Cross-head screwdriver
Powered drill
Pencil
INSTALL ANTI-TIP BRACKET
For plaster board wall
Fix the anti-tip bracket to the
wall with #10x40mm cross head
screws, and screw tightly with a
screwdriver.
screws
masonry plugs
For solid wall installation
Hammer 10x30mm masonry plugs
into wall until flush. Fix bracket to
wall with #10x40mm cross head
screws, and screw tightly.
180mm
Bracket
Wall
PROFILE VIEW
180mm
Bracket
Spacer
Appliance
Wall
PROFILE VIEW
Roll the appliance slowly into
the cabinetry until the anti-tip
bracket overlaps the back edge
of the appliance.
Ensure the bracket overlaps
z
the appliance by a minimum
180mm for a secure hold.
If minimum 180mm overlap
cannot be achieved, install a
solid spacer to the wall stud
behind the bracket.
Be careful not to run over
z
the power cord when rolling
in the appliance.
37