Tools
Cross-head screwdriver
A
Ruler
60
DUAL INSTALLATION
min 7 1/16" (180mm)
b
PROFILE VIEW
e
e
Aligning the first appliance into the cabinetry
1 Roll the first appliance (A) slowly into one side of the cabinetry
until the anti-tip bracket (B) overlaps the back edge of
the appliance.
Ensure the bracket overlaps the appliance by a minimum
180mm for a secure hold. Refer to 'Install anti-tip bracket' for
more information.
D
2 Align the top cap (C) of the first appliance flush with the front
C
of the spacer (D).
F
3 Mark the step of the depth gauges (E) on the cabinetry side of
the door based on the thickness of door panel.
4 Align the marked line (F) flush with the front surface of the
adjacent cabinetry.
e