Table of Contents
Advertisement
Water fittings kit
Collet locking clip
(1)
1/2 BSP Stainless steel
braided hose with
adaptor (1)
1/4" (6mm) Adaptor
(2x)
CONNECT WATER AND POWER SUPPLY
E
C
5 Insert the tube end of the adaptor fully into the
PLV (C) at the bottom front of the appliance.
D
6 Secure the connection with a locking clip
between the PLV and hose end of adaptor (D).
Check the connection and open the water
z
supply to test for leaks.
Connecting to power supply
1 At the back of your appliance, connect the power
cable to the power supply (115VAC, 60Hz) (E).
You will hear a chime sound when the
z
appliance is powered on.
Refer to your 'User guide' for more details on
z
activating the appliance.
39
Advertisement
Table of Contents
