Tools
Cross-head
screwdriver
Cutter
M4 hex key (1)
13mm spanner (1)
INSTALL LOCKING BRACKET
1 Loosen the screw at the bottom
of the refrigerator door, and slide
the locking bracket (A) out until it
A
touches the panel.
2 Fix the locking bracket
to the door panel with
8Gx16 countersunk screw (B).
B
3 Re-tighten the screw at the
bottom of the door.
INSTALL ADJUSTMENT BRACKETS
1 Loosen the cap screws (C) of the
adjustment brackets (D) on both
C
sides of the plinth with a hex key.
D
2 Adjust the brackets to the
desired depth by moving it
forward/backward.
3 Re-tighten the cap screws
once satisfied.
51