Table of Contents
Advertisement
Electric Shock Hazard
Failure to follow this advice may result in
electrical shock or death.
• Read and follow the safety and warnings
outlined in this User guide before operating this
appliance.
Cut Hazard
Failure to use caution could result in injury.
• Take care: panel edges may be sharp.
• Do not put fingers in the drawers when closing.
Tip Hazard
• This product may tip. Keep children away and
take care. Failure to follow this advice may
result in injury.
• This appliance is top-heavy and must
be secured to prevent the possibility of
tipping forward.
To ensure that the appliance is stable under
all loading conditions:
• The anti-tip bracket and fittings supplied
must be installed by a professional installer
according to the installation steps in this guide.
4
WARNING!
!
WARNING!
!
WARNING!
!
SAFETY AND WARNINGS
SAVE THESE INSTRUCTIONS
WARNING!
To avoid hazard, follow these instructions carefully before installing or using this appliance.
Please make this information available to the person installing the appliance.
z
Assume all electrical parts are live.
z
Disconnect power supply before servicing and installation.
z
BEFORE INSTALLATION
The appliance has front and rear rollers for moving the appliance forward and backward.
z
Do not move the appliance sideways to avoid damaging the rollers or the floor
covering/surface.
Ensure your appliance is not exposed to any heat generating appliance eg cooktop, oven
z
or dishwasher.
The appliance must be installed by a qualified installer, or Fisher and Paykel trained and
z
supported service technician to avoid faulty electrical and plumbing connections.
All connections for electrical power and grounding must comply with local codes and
z
ordinances and be made by licensed personnel when required.
Avoid installation of the appliance/s near a ground fault circuit interrupter (GFCI).
z
Ensure the appliance is installed properly. Improper installation that results in appliance
z
failure is not covered under the appliance warranty.
UNPACKING
The appliance is heavy and requires at least two persons to move and install.
z
Remove the installation kit (internal box) and trims kit (external box) while the product is
z
still on the pallet.
Avoid scratching the surface of your appliance when moving or installing.
z
Keep the appliance stable and door closed to prevent tipping over when moving to the
z
installation location.
Ensure the feet of the appliance are retracted before moving to the installation location.
z
If the appliance is damaged, contact your Fisher and Paykel dealer.
z
Ensure all components and accessories are complete. Refer to 'Before installation' page.
z
Record the default Wifi password, and the model and registration numbers for future
z
servicing or repair of your appliance.
ELECTRICAL/PLUMBING
Electrical and water supply connections for these appliances must be located in an
z
adjacent area or unit (cabinet or cupboard) that are easily accessible in case of repair or
disconnection.
Ensure an isolating switch is available if electrical connection is not accessible.
z
INSTALLATION
Cavity preparation
The anti-tip bracket and fittings supplied must be fitted to the wall of the finished
z
enclosure to withstand a 100kg load.
Ensure that the anti-tip bracket is installed correctly to prevent the possibility of the
z
appliance tipping forward when the door is open.
Advertisement
Table of Contents
