Table of Contents
Advertisement
Miscellaneous
components
Air toe kick seal (1)
Toe kick install kit
Toe kick panel (1)
Tools
Cross-head screwdriver
M4 hex key (1)
52
INSTALL TOE KICK PANEL
a
b
b
C
C
D
toe kick
D
Attaching the mounting plate
a
1 Re-attach the toe kick mounting plate (A) to the plinth using same
2 If toe kick depth is less than 92mm, attach an air toe kick seal (B)
b
C
3 Peel off the adhesive tape backing of the magnets (C) attached to
Attaching the toe kick panel
1 Position the toe kick in front of the mounting plate.
D
2 Press the toe kick onto the mounting plate to fix the position.
screws that were set aside previously.
to the mounting plate.
Peel off the adhesive tape of air toe kick seal and attach to the
z
middle of the back side of the mounting plate.
the mounting plate.
The spacers (D) on the toe kick must be aligned with the
z
magnets of the mounting plate.
For custom toe kick, spacers are not needed.
z
For correct dimensions of toe kick, refer to 'Toe kick panel
z
dimensions' for more information.
Advertisement
Table of Contents
