Cisco Catalyst 2955 Hardware Installation Manual page 69

Chapter 3 Installation
An exposed wire lead from a DC-input power source can conduct harmful levels
Warning
of electricity. Be sure that no exposed portion of the DC-input power source
wire extends from the power and relay connector. Statement 122
Do not work on the system or connect or disconnect cables during periods of
Warning
lightning activity. Statement 1001
When used in a Class I, Division 2, hazardous location, this equipment must be
Warning
mounted in a suitable enclosure with proper wiring method, for all power, input
and output wiring, that complies with the governing electrical codes and in
accordance with the authority having jurisdiction over Class I, Division 2
installations. Statement 1066
Warning Ultimate disposal of this product should be handled according to all national
laws and regulations. Statement 180
Warning Class 1 laser product. Statement 1008
Class 1 LED product. Statement 1027
Warning
Invisible laser radiation may be emitted from disconnected fibers or
Warning
connectors. Do not stare into beams or view directly with optical instruments.
Statement 1051
For diverging beams, viewing the laser output with certain optical instruments
Warning
within a distance of 100 mm may harm your eyes. For collimated beams, viewing
the laser output with certain optical instruments designed for use at a distance
may harm your eyes. Statement 282
78-14944-03
Catalyst 2955 Hardware Installation Guide
Preparing for Installation
3-5