Cisco Catalyst 2955 Hardware Installation Manual page 141

Chapter 4 Installation in a Hazardous Environment
Do not work on the system or connect or disconnect cables during periods of
Warning
lightning activity. Statement 1001
Ultimate disposal of this product should be handled according to all national
Warning
laws and regulations. Statement 180
Class 1 laser product. Statement 1008
Warning
Warning Class 1 LED product. Statement 1027
Invisible laser radiation may be emitted from disconnected fibers or
Warning
connectors. Do not stare into beams or view directly with optical instruments.
Statement 1051
Warning For diverging beams, viewing the laser output with certain optical instruments
within a distance of 100 mm may harm your eyes. For collimated beams, viewing
the laser output with certain optical instruments designed for use at a distance
may harm your eyes. Statement 282
Avoid direct exposure to the laser beam. Statement 1012
Warning
This equipment is suitable for use in Class I, Division 2, Groups A, B, C, D, or
Caution
non-hazardous locations only.
78-14944-03
Catalyst 2955 Hardware Installation Guide
Preparing for Installation
4-7