Cisco Catalyst 2955 Hardware Installation Manual page 153

Chapter 4 Installation in a Hazardous Environment
Figure 4-2
1
2
Insert the ground wire into the ring terminal lug, and using a crimping tool, crimp
Step 3
the ring terminal to the wire.
Figure 4-3
Slide the ground screw through the ring terminal.
Step 4
Insert the ground screw into the functional ground screw opening on the front
Step 5
panel.
78-14944-03
Stripping the Ground Wire
1
2
0.5 inch (12.7 mm) ± 0.02 inch
(0.5 mm)
Insulation
Crimping the Ring Terminal
3
3
Wire lead
Catalyst 2955 Hardware Installation Guide
Verifying Switch Operation
4-19