Cisco Catalyst 2955 Hardware Installation Manual page 175

Chapter 4 Installation in a Hazardous Environment
Figure 4-19
1
2
Rotate the switch down toward the DIN rail until the release tab on the rear panel
Step 2
clicks.
Lift lightly on the bottom of the switch to ensure that it is firmly locked in place.
Step 3
After the switch is mounted on the DIN rail, power on the switch as described in
the
78-14944-03
Mounting the Switch on a DIN Rail in a Face-Down Position
3
DIN rail clip
DIN rail
"Powering On the Switch and Running POST" section on page
DIN rail clip release tab
Catalyst 2955 Hardware Installation Guide
Installing the Switch on a DIN Rail
1
2
3
4-16.
4-41