Table of Contents
Advertisement
DEALER PRE-DELIVERY CHECK LIST
After the Forage Box has been completely set-up, check to be certain it is in correct running order before
delivering to the customer. The following is a list of points to inspect. Check off each item as you have made
the proper adjustments and found the item operating satisfactorily .
o
Forage Box was not damaged in shipment. Check for dents and loose or missing parts. Report damage
immediately to H&S Manufacturing Co., Inc.
o
Forage Box has been correctly assembled according to the instructions in this manual.
o
All shields and guards are in place and fastened.
o
PTO shields turn freely.
o
All grease fittings have been lubricated and gear boxes filled to proper level – See lubrication guide in
this manual.
o
All mechanisms are operating trouble free.
o
All roller chains are at proper tension.
o
Apron chains are adjusted properly.
o
All bolts and fasteners are tight.
o
2 extra shear bolts are provided.
o
All decals are in place and legible.
(Signature of Pre-Delivery Inspector)
DEALER DELIVERY CHECK LIST
This check list that follows is an important reminder of valuable information that should be passed on to the
customer at the time this Self-Unloading Forage Box is delivered. Check off each item as you explain it to
the customer. This pre-delivery check list, when properly filled out and signed assures the customer that
the pre-delivery service was satisfactorily performed.
o
Explain to the customer that the pre-delivery inspection was made.
o
Explain to the customer all the safety precautions they must exercise when operating this unit.
o
Explain recommended loads for different types of materials.
o
Explain to customer that regular lubrication is required for proper operation and long life of
machine. Show customer the lubrication section of Owner's Manual.
o
Give the customer Owner's Manual and make sure he reads and understands all operating and
service instructions.
o
Record Serial Number in this Manual.
o
Have customer sign a completed "Warranty Registration,'' and mail it promptly.
Dealer's Name ______________________________ By ___________________________________
Signature of Original Buyer ______________________________________ Date _________________
Note: Warranty is not valid until warranty card is completed and returned to H&S Mfg. Co., Inc.
(Dealer's Name)
-3-
Model Number
Serial Number
(Inspection Date)
Advertisement
Table of Contents
