Assembly; Assemble/Adjust Spark Protection - Parkside PDOS 200 C2 Translation Of The Original Instructions

d) Damage to your health caused by
swinging your hands and arms when
operating the appliance for longer pe-
riods of time or if the unit is not held or
maintained properly.
Warning! During operation, this
electric tool generates an electro-
magnetic fi eld which, under certain
circumstances, may impair the func-
tionality of active or passive medical
implants. To reduce the risk of seri-
ous or lethal injuries, we recommend
that persons with medical implants
consult their doctor and the manu-
facturer of their medical implant
before operating the machine.

Assembly

Caution! Risk of injury!
- Ensure that you have suffi cient
space in which to work, and that
you do not endanger other peo-
ple.
- Always fasten the device on to
the work surface with screws
featuring the suffi cient length and
thickness in order to maintain
control of the device.
- All covers and protective devices
must be assembled properly be-
fore commissioning.
- Disconnect the mains plug before
changing the setting on the de-
vice.
Figure and Figure
how to fi t the spark protection and
workpiece support on the left-hand
side of the device. Fit the second
spark protection and the second
workpiece support mirrored on the
right side of the device.
Assemble/adjust spark
protection
show
GB IE
You will need a screwdriver and
a spanner (size 8 mm) (sold sepa-
rately) to use as a counter holder to
fi t the above.
1. Screw the spark protection (1) to
the spark protection holder (2). To
do this, use the fi xing screws (4),
nut (4a), spring washer (4b) and
washer (4c) supplied.
2. Fit the second spark protection in
a similar manner.
3. Screw the spark protection holder
(2) fi rmly to the protective hood
(5). To do this, use 1 adjusting
screw (3) including the spring
washer and fl at washer and 1 nut
(3a) for each.
4. Adjust the spark protection (1)
with the adjusting screw (3):
The distance between the grind-
ing disc (10) and spark protec-
tion holder (2) must not exceed
2 mm (see small image).
Periodically readjust the spark pro-
tection in order to offset the wear
and tear of the grinding disc (dis-
tance max. 2 mm).
Despite the spark protection, you
should always wear safety glasses
when working in order to avoid eye
injuries.
NI CY
11