Table of Contents
Advertisement
Connecting the following connectors as target connectors (type A and type B) is recommended.
Type A (16-pin): 7616-5002SC (Sumitomo 3M Limited)
Type B (10-pin): FAP-10-08#2-0BF (Yamaichi Electronics Co., Ltd.)
When using a self-made cable because the supplied cable cannot be used due to the specifications of the target,
the cable length should be the same or shorter than the supplied cable. Also, the frequency characteristics of the
cable material should be the same or higher than those of the supplied cable.
Note that communication may be performed at high speed according to the communication settings. Therefore,
when a cable other than the supplied cable is used the system may not operate normally due to communication
errors.
94
CHAPTER 7 CONNECTORS AND CABLES
User's Manual U15260EJ3V1UM
Advertisement
Table of Contents
