Table of Contents
Advertisement
PG-FP4 complies with the EMC protection requirements
This is a 'Class A' (EN 55022: 1998) equipment. This equipment can cause radio
frequency noise when used in the residential area. In such cases, the user/operator of
the equipment may be required to take appropriate countermeasures under their own
responsibility.
This equipment should be handled like a CMOS semiconductor device. The user must
take all precautions to avoid build-up of static electricity while working with this
equipment. All test and measurement tool including the workbench must be grounded.
The user/operator must be grounded using the wrist strap. The connectors and/or
device pins should not be touched with bare hands.
WARNING
CAUTION
User's Manual U15260EJ3V1UM
EEDT-ST-001-11
EEDT-ST-004-10
3
Advertisement
Table of Contents
