Table of Contents
Advertisement
CHAPTER 4 PG-FP4 OPERATION USING GUI SOFTWARE
<4> Program download/upload
The PG-FP4 has 2 MB of flash memory as a user program area.
This memory area can be used as a single 2 MB area, or as two independent 1 MB areas (Area 0 and Area
1).
Different user programs can be downloaded to Area 0 and Area 1, and it can be selected which of the
programs is to be written to the target device.
Figure 4-30. Setup Window – Program Download/Upload
[Enable two Program Areas check box]
If this check box is not checked, one 2 MB memory area is used as the user program area.
If it is checked, one of two independent 1 MB memory areas (Area 0 and Area 1) are used as the user
program area. For which area is to be used, refer to the [Programmer] → [Select Programming area...]
menu.
69
User's Manual U15260EJ3V1UM
Advertisement
Table of Contents
