Page 2
NEC does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC PRODUCT(S) listed in this customer notification or any other liability arising from the use of such PRODUCT(S).
Table of Contents Table of Operating Precautions..................4 Description of Operating Precautions................5 Product Version ......................8 Supported Devices......................9 Valid Specification ...................... 11 Revision History ......................12 Customer Notification...
Operating Precautions for QB-MINI2-EE (A) Table of Operating Precautions QB-MINI2-EE Debug Target Outline Control Code: Device Progr. Firmware: V3.00 V4.00 Invalid internal high-speed RAM area after RESET 78K0 Debug Use of watchdog timer V850 Debug Break during sub-clock operation V850...
But if UART is the communication channel between QB-MINI2-EE and target device, an occurring break during sub-clock operation (while the main clock has been stopped) will forcibly switch the operation clock to main clock. The device continues its operation with the main clock after monitor program execution.
Page 6
Operating Precautions for QB-MINI2-EE No.5 Reset vector handling Details The reset vector cannot be used. Workaround No workaround available Modifying specific registers Details Peripheral I/O registers (except PCC and CKC), that require a specific program sequence for access, cannot be modified in the I/O register of the debugger.
Page 7
Operating Precautions for QB-Mini2 No.9 Downloading when operation clock is 10MHz Target Device 78K0S Details When the target device operating frequency is 10MHz, an error will occur during download of a program and the downloading cannot be completed. Workaround No workaround available No.10 Display of register values Target Device...
(C) Product Version The “Control Code” is an alphabetic code used to identify the hardware of QB-MINI2-EE. It is the second digit from the left in the 10-digit serial number printed on the sticker attached to the bottom side of QB-MINI2- EE (if it has not been upgraded).
Operating Precautions for QB-Mini2 (D) Supported Devices The devices that are supported by Mini2 are listed in the following table: Information on the supported devices is also available on the following QB-Mini2 webside URL http://www.necel.com/micro/english/products/sc/allflash/minicube2.html 1. 78K0 microcontrollers the following table lists the support status for 78K0 microcontrollers. Support for the target device also differs depending on the version of the development tools.
Page 10
Operating Precautions for QB-MINI2-EE 3. V850 microcontrollers the following table lists the support status for V850 microcontrollers. Support for the target device also differs depending on the version of the development tools. Check the serial interface that can be used as a communication interface between Mini2 and the target devi ce.
Operating Precautions for QB-Mini2 (E) Valid Specification Item Date published Document No. Document Title June 2006 U17966EE QB-MINI2-EE Setup Manual ZUD-CD-06- April 2006 QB-MINI2-EE Preliminary User’s Manual 0018_1_E Customer Notification...
Operating Precautions for QB-MINI2-EE (F) Revision History Item Date published Document No. Comment June 2006 TPS-LE-OP-TMINI2-1 Release August 2006 TPS-LE-OP-TMINI2-2 add K0S restrictions Customer Notification...