NEC PG-FP4 User Manual page 113

No.
E 750 Writing to INI-File failed.
E 800 Illegal address
E 801 The file cannot be read.
E 802 No HEX data.
E 803 The file cannot be written.
E 804 cannot open <file name>
abort
E 805 cannot open file
E 806 Check sum error.
Continue ?
E 808 Invalid file name.
E 809 <file name> could not be opened.
abort
E 900 Unable to open last active PRM/SET file. Using
most recent settings.
E 901 Searching for fp4com.dll failed.
E 903 Unable to find any PRM file. Please install PRM
files.
E 907 Download of PRM file failed.
E 908 Download of SET file failed.
E 910 Checking device name failed.
E 911 Checking device end address failed.
CHAPTER 10 ERROR MESSAGES
Message
User's Manual U15260EJ3V1UM
Description
Writing to the FP4.INI file failed.
The end address entered in the HEX Editor is lower than
the start address.
Processing the selected file in the HEX Editor failed.
The file format could not be read in the HEX Editor.
The Windows write-file function failed in the HEX Editor.
The Windows file-open function failed in the HEX Editor.
A NULL handle was returned when a file was opened in
the HEX Editor.
The HEX Editor detected a faulty checksum. The
checksum will be corrected if continuing.
The specified file could not be found in the HEX Editor.
The Windows file-open function failed in the HEX Editor.
The FP4.INI file does not exist or contains invalid entries
for RecentPrmFile or RecentSet-File.
PRM file from sub-directory \PRM will be loaded instead.
Cannot find Communication DLL fp4com.dll. Reinstall PG-
FP4 software.
Sub-directory \PRM does not exist or valid PRM file does
not exist in the sub-directory \PRM.
An error occurred while attempting to download a PRM file.
The PRM file may be invalid.
An error occurred while attempting to download a SET file.
The SET file may be invalid.
The parameter file signature differs from the signature read
from the device.
The parameter file signature differs from the signature read
from the device.
The first
113