NEC PG-FP4 User Manual page 46

CHAPTER 4 PG-FP4 OPERATION USING GUI SOFTWARE
After selecting a file to open, the HEX Editor main window loads the file and displays its contents as follows.
Figure 4-6. HEX Editor Main Window
The displayed file can be modified by placing the mouse cursor inside the HEX Editor main window. Data input
via the keyboard is accepted for all shown memory locations.
The HEX Editor accepts data only in hexadecimal format, i.e. figures 0 - 9 and letters A - F. Any other data will
be rejected.
The ASCII representation, if any, is shown at the right side of the main window. This area is for reference only.
Data input is not possible in the ASCII window.
Use the scroll bar to move another address range into the visible area of the HEX Editor.
The address space shown in the HEX Editor window is limited to 4 MB.
The following keys can be input using the keyboard.
46
User's Manual U15260EJ3V1UM