Silvercrest SWC 10 A1 Operation And Safety Notes page 19

Press the MODE button
Switching off the alarm signal
The alarm signal will sound at the set time for around 2
minutes. Press any button with the exception of the
snooze / light button
not have to reactivate the alarm function. The alarm signal will
automatically sound again at the set time.
Snooze function
While the alarm is going off, press the snooze / light button
10 to activate the snooze function. The alarm is interrupted for
around 5 minutes. The display for the snooze symbol
the Alarm symbol
Background lighting
Press the snooze / light button
lighting brightness in four stages (high, medium, low, off).
Operation in basic mode
Time display
Clock format: Press the Up button
24-hour format (0:00 o'clock–23:59 o'clock) and 12- hour
format (1:00 o'clock–12:59 o'clock). In 12-hour mode the
time from 12:00 o'clock in the afternoon until 11:59 o'clock
at night will show PM (Latin for "post meridiem" = after noon)
in the display.
Date display
Date display formant: select from MD (Month/ Date) /DM
(Date/ Month) by pressing and holding the Up button
2 seconds.
Temperature display
The temperature measured by the product is displayed with
one decimal place. The temperature unit (°C) is shown on the
top right of the display.
20 GB/IE/NI
12 return to basic mode.
to switch the alarm signal off. You do
10
18 flashes on the display.
8
17
14
to set the background
10
to select between
11
and
9
for
11