Silvercrest SWC 10 A1 Operation And Safety Notes page 18

This allows you to change the following settings in sequence:
Hour / Minute / Year / Month / Day / Language
Press the Up button
desired language. You can choose between German (DE),
English (GB), French (FR), Spanish (ES), Dutch (NL), Danish
(DK) and Italian (IT), German (DE) is set as the standard
language by default.
Setting the alarm
Press the MODE button
alarm time set and the display for the alarm mode [ALM] are
shown on the weekday display
Press and hold the MODE button
The hour display blinks.
Press the Up button
required value.
Press the MODE button
display blinks.
Press the Up button
required value.
Press the MODE button
symbol
is active.
Activate / deactivate alarm function
Press the MODE button
alarm time set and the display for the alarm mode are shown
on the display .
Press the Up button
The Alarm symbol
that the alarm function is active.
Press the Up button
goes out and the alarm function is deactivated.
18
or the Down button
11
12
or the Down button
11
12
or the Down button
11
12
18 appears on the display and the alarm function
12
briefly to activate the alarm function.
11
18 appears on the display to indicate
again briefly. The Alarm symbol
11
to access alarm mode. The current
.
16
12 for around 3 seconds.
to confirm your entry. The minute
to confirm your entry. The Alarm
to access alarm mode. The current
to select the
13
to set the
13
to set the
13
GB/IE/NI
19