Helmet Hook (If Fitted) - Triumph Bonneville T100 Owner's Handbook Manual

GENERAL INFORMATION
70

Helmet Hook (if fitted)

Never ride
helmet(s) secured to the helmet hook
as this may cause the motorcycle to
become unstable leading to loss of
control and an accident.
Do not allow helmet(s) to rest against
a hot muffler. The helmet may be
damaged.
A helmet can be secured to the
motorcycle
located on the left hand side of the
motorcycle, beneath the seat.
To attach a helmet to the motorcycle:
Remove the seat (see page 71) and
▼
loop the helmet chin strap over the
hook.
Make sure the flat area above
▼
the hook is not obstructed by the
helmet strap, as this will prevent the
seat engaging correctly.
To secure the helmet, re-install the
▼
seat and lock into position.
Warning
the motorcycle
Caution
using the helmet
Seats
Seat Care
with
To prevent damage to the seats or
seat covers, care must be taken not to
drop the seats.
Do not lean the seats against the
motorcycle or any surface which may
damage the seats or seat covers.
Instead, place the seats, with the seat
cover facing upwards, on a clean, flat
surface which is covered with a soft
cloth.
Do not place any item on the seats
which may cause damage or staining
hook
to the seat covers.
Thruxton RS Only
To prevent damage to the seat after
removing:
Release the metal stand from the
▼
underside of the seat.
Caution
Seat Stand