GENERAL INFORMATION
68
Side Panels
All Models except Scrambler 900
The right side panel can be removed to
gain access to the adjustment tool and
the rear brake fluid reservoir.
1
1.
Side panel (right hand shown)
2.
Grommets
To remove either side panel:
Grasp the panel firmly and pull the
▼
panel away from the motorcycle
until it is free from the three
retaining
grommets in place).
To reinstall either side panel:
Position the three locating dowels to
▼
the grommets, then press firmly to
secure the panel.
Finally, grasp the panel and make
▼
sure that it is fully retained.
2
grommets
(leaving
Scrambler 900
Left Hand Side Panel
The left hand side panel can be removed
to gain access to the adjustment tool.
2
2
1.
Side panel (left hand shown)
2.
Grommets
To remove the left hand side panel:
Grasp the panel firmly and pull the
▼
panel away from the motorcycle
until it is free from the three
retaining
grommets in place).
the
To reinstall the left hand side panel:
Position the three locating dowels to
▼
the grommets, then press firmly to
secure the panel.
Finally, grasp the panel and make
▼
sure that it is fully retained.
2
grommets
(leaving
1
the