Table of Contents
Advertisement
• If this process takes longer than several minutes,
software download and installation may be occurring. If
the Heart button flashes again, press it again. Refer to
"Software Download and Installation" on page 49.
• If you have previously completed initial setup, the Heart
button will not flash at this point. Instead of pressing
the Heart button, follow the instructions for pressing the
Status button in "Confirming Connection to the Clinician
Website" on page 20.
8. Your Communicator has successfully connected to the
Clinician Website if the lights are lit as shown as follows.
Setup is complete, and no further action is needed at this
time. Leave your Communicator plugged in.
• If the wave lights are not lit a solid green, refer to the
applicable error in the Troubleshooting section starting
on page 51.
When using the internet connection method, keep your
Communicator plugged in to the electrical outlet and
connected to the USB Ethernet adapter.
Replacement
If you need a replacement internet connection accessory or a
different connection method (standard telephone, cellular, or
hotspot), contact your health care provider.
For information on returning, replacing, or disposing of your
internet connection accessory, see page 23.
42
LATITUDE™ Communicator Patient Manual
Advertisement
Table of Contents
