Special Instructions If Using The Standard Telephone Connection Method; Traveling; Setting Switches 1-3 For Dial-Out Or Prefix Number - Boston Scientific LATITUDE 6288 Patient Manual

Special Instructions if Using the Standard Telephone
Connection Method
For more information on setting up the standard telephone
connection, see page 43.

Traveling

If you travel to another country and use a standard telephone
to connect to the Clinician Website, you may need to change
the country switch settings. Consult your health care provider to
learn if you need to change the switch settings when you travel
to another country with your Communicator.

Setting Switches 1-3 for Dial-out or Prefix Number

If you are using a standard telephone connection method
to connect to the Clinician Website, and if you need to use
a dial-out or prefix number to place an outside telephone
call, switches 1-3 need to be changed from the "off" position
shown in "Figure 4. Dial-out Number Switch Settings (1-3)" on
page 33. (A dial-out number to one of the settings shown
in "Figure 4. Dial-out Number Switch Settings (1-3)" on page
33 may be required in a managed care facility or hotel. For
example, if you need to dial a "9" before the number when
placing a call, "9" is your dial-out number.)
Note that the telephone service in the facility must be analog,
not digital, for the standard telephone connection to work. If
you are unsure which telephone mode is available, ask the
facility or your service provider.
To set your Communicator for a dial-out or prefix number, slide
switches 1-3 up or down so that they match the settings for the
dial-out number shown in the following figure.
32
LATITUDE™ Communicator Patient Manual