Standard Telephone Connection
When using the standard telephone connection method, do
not use another connection method, such as cellular, internet,
or hotspot.
Complete the following steps to set up your Communicator
with a standard telephone connection to send your data to
the Clinician Website. The numbers in Figure 8 refer to the
corresponding steps.
* Connecting a telephone to your Communicator is optional. To do so, plug
your telephone into the jack labeled
adapter. Your Communicator and a telephone can share the same
telephone wall jack. However, they cannot be used at the same time.
Figure 8. Connecting a Telephone Cable
When using the standard telephone connection, place your
Communicator near a telephone wall jack.
Refer to "Figure 8. Connecting a Telephone Cable" for depiction
of steps 1-4.
1.
Insert the power supply (included) into the jack
labeled
.
LATITUDE™ Communicator Patient Manual
*
or into a telephone jack
43