Connections - ESAB A2 TF Instruction Manual

GB
3.4

Connections

3.4.1 General
The A2 Welding Control Unit (PEI) is to be connected by a qualified person.
S
For the connection of welding power source LAF, see separate instruction
S
manual.
3.4.2 Automatic welding machine A2 TF (Submerged arc welding, SAW)
1. Connect the control cable (7) between the power source (8) and the control box
A2 Welding Control Unit (2).
2. Connect the return cable (11) between the power source (8) and work piece (9).
3. Connect the welding cable (10) between the power source (8) and the automatic
welding machine (1).
4. Connect the measurement cable (12) between the power source (8) and
workpiece (9).
fhb5i1ea
- - 84 - -