Assembling The Planet Carrier - MASSEY FERGUSON 5400 Service Manual

I . Assembling the planet carrier
49. Screw two diametrically opposed guide studs in
the hydraulic cover (25).
50. Assemble the planet carrier unit (9) on the
hydraulic cover (25) while holding the sun gears (6)
and (7) (Fig. 9).
N : Position the planet carrier unit and the cover
OTE
so that the balancing marks (ground marks) are as
far as possible on opposite sides
51. Refit the screw (3). They must be tightened to a
torque of 14 - 20 Nm.
52. Strike pins (8) definitively home against the
hydraulic cover (25) with a pin drift.
53. Check that:
- the discs (42) are not compressed;
- the pinion gears (12) and sun gears (6) and (7)
turn freely.
54. Install the planet carrier (50) on shaft (5).
55. Position a Belleville washer (18) as per
56. Position intermediate plate (20) in housing (13).
57. Install the brake disc (21) on the planet carrier.
Massey Ferguson 5400 - Issue 1.a
GBA20 Speedshift with Power Shuttle
(Fig. 19).
Fig. 2.
MA-05-00374A
Fig. 19
05D02.19