Table of Contents
Advertisement
AUTOTRONIC 5 - Power Shuttle - Calibration and adjustments
1) Preliminary operations
Start the engine.
Move Power Shuttle lever to
neutral position
Release the clutch pedal
2) Entering adjustment
mode
Press simultaneously and for
4 s the Hare / Tortoise range
switch and differential lock
switch
3) Choosing the clutch
Select the clutch requiring
parameter adjustment by
moving the Power Shuttle lever
to forward or reverse position,
then move the lever to neutral
position.
4) Adjusting responsive-
ness
Move the lever forwards to
increase responsiveness or
backwards to reduce
responsiveness, then quickly
return the lever to neutral.
5) To
Validate:
Wait 4 s without carrying out
any operation
Cancel:
press the clutch pedal down
within 4 s
MA-11-01283A
Wintest - Issue 5.a
Preocedure to follow
The forward and reverse
indicator lights flash quickly
After 4 s
and simultaneously
The indicator light indicates
the direction selected
The indicator light of the
selected clutch changes
status each time the lever
is moved
The Power Shuttle locks
As long as the clutch is not
selected, the Auto 5 stays in
selection standby mode (3).
Once selected, 4 s are
allowed between each
operation
This adjustment procedure
can be repeated 5 times in
the same direction for the
same clutch.
In this case return to step
(1).
If the operator moves the
lever before 4 seconds has
passed, the Auto 5 returns
to step (1).
Fig. 2
GUF514.7
Advertisement
Chapters
Table of Contents
