Table of Contents
Advertisement
7 Related Parameters
No.
Name
LOCAL/
REMOTE
o2-01
Key Function
Selection
STOP Key
o2-02
Function
Selection
Frequency
Reference
o2-05
Setting
Method
Selection
Operation
Selection
when LCD
o2-06
Operator
Option
is
Disconnected
Copy Function
o3-01
Selection
Copy
o3-02
Allowable
34
Enables/Disables the LCD Operator Option LOCAL/REMOTE
key.
0: Disabled
1: Enabled
Enables/Disables the operator panel STOP key when the drive is
operated form external sources (not operator).
0: Disabled
1: Enabled
Selects if the ENTER key press is required when inputting the
frequency reference by the operator keypad.
0: Data/Enter key must be pressed to enter a frequency reference.
1: Data/Enter key is not required. The frequency reference is
adjusted by the up and down arrow keys.
Sets drive action when the LCD Operator Option is removed in
LOCAL mode or with b1-02 = 0.
0: The drive will continue operation.
1: The drive will trigger a fault (oPr) and the motor will coast to
stop.
This parameter controls the copying of parameters to and from
the LCD Operator Option.
0: COPY SELECT (no function)
1: All parameters are copied from the drive to the LCD Operator
Option.
2: All parameters are copied from the LCD Operator Option to
the drive.
3: Parameter settings in the drive are compared to those in the
LCD Operator Option.
Note: When using the copy function, the drive model number
(o2-04), software number (U1-14), and control method (A1-02)
must match or an error will occur.
Enables or disables reading of drive parameter settings.
0: Disabled - Read not allowed
1: Enabled - Read allowed
YASKAWA TOBP C730600 29A V1000 Option LCD Operator Installation Manual
Description
Default
1
1
0
0
0
0
Advertisement
Table of Contents
